The following example configures the instrument for pulse width measurements on channel 2 with a 1.2V
reference level, makes one measurement using an external trigger, and then transfers the measurement
to the instrument output buffer.
CONF:PWID 1.2V,(@2)
TRIG:SOUR EXT;SLOP POS
INIT
FETC?
Typical Response: +4.82342300000000E-006
See Also
CONFigure?
INITiate[:IMMediate]
MEASure?
READ?
CONFigure:PWIDth
144 Keysight 53220A/53230A Programmer's Reference
To Next Page
Loading...
