Examples
The following example configures the instrument to make 1,000 timestamp measurements on channel 1,
makes the measurements, and then transfers the prescaler value followed by the measurements to the
instrument output buffer.
MEAS:ARR:TST? (1000)
Typical Response: +100,+5.10520000000000E-006,+5.10370000000000E-006, ....
(1,000
timestamps)
See Also
CONFigure?
FETCh?
READ?
Keysight 53220A/53230A Programmer's Reference 241
MEASure:ARRay:TSTamp?
To Next Page
Loading...
