The following example configures the instrument for 10-digit frequency ratio measurements between
channel 2 and channel 1, makes one measurement, and then transfers the measurement to the instru-
ment output buffer.
MEAS:FREQ:RAT? 1.2,1e-10,(@2),(@1)
Typical Response: +1.21513398300000E+001
See Also
CONFigure?
FETCh?
READ?
SENSe:FREQuency:GATE:SOURce
SENSe:FREQuency:GATE:TIME
Keysight 53220A/53230A Programmer's Reference 253
MEASure:FREQuency:RATio?
To Next Page
Loading...
