output buffer.
MEAS:PWID?
Typical Response: +5.10520000000000E-006
The following example configures the instrument for pulse width measurements on channel 2 with a 1.2V
reference level, makes one measurement, and then transfers the measurement to the instrument output
buffer.
MEAS:PWID? 1.2V,(@2)
Typical Response: +4.82342300000000E-006
See Also
CONFigure?
FETCh?
READ?
Keysight 53220A/53230A Programmer's Reference 269
MEASure:PWIDth?
To Next Page
Loading...
