13 Global Error 8192 Set if any remote interface has an error in its error queue; cleared oth-
erwise.
14 Not Used 16384 (Reserved for future use)
15 Not Used 32768 "0" is returned.
Return Format
The query reads the condition register and returns a decimal value which corresponds to the binary-
weighted sum of all bits set in the register (see table above). For example, if bit 5 (decimal value = 32) and
bit 9 (decimal value = 512) are set, this command will return +544.
Example
The following example reads the condition register (bit 5 is set).
STAT:OPER:COND?
Typical Response: +32
See Also
STATus:OPERation:ENABle
STATus:OPERation[:EVENt]?
Keysight 53220A/53230A Programmer's Reference 383
STATus:OPERation:CONDition?
To Next Page
Loading...
