EasyManua.ls Logo

Keysight 53230A - Page 396

Keysight 53230A
518 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14 Rdg Mem Overflow 16384 Reading memory is full. One or more (oldest) measurements have
been lost.
15 Not Used 32768 "0" is returned.
l Once a bit is set, it remains set until cleared by reading the event register or the *CLS (clear status) com-
mand.
l The *RST, SYSTem:PRESet, and STATus:PRESet commands have no effect on this register.
Return Format
The query reads the event register and returns a decimal value which corresponds to the binary-weighted
sum of all bits set in the register. For example, if bit 1 (decimal value = 2) and bit 9 (decimal value = 512)
are set, this command will return +514.
Example
The following example reads the event register (bit 10 is set).
STAT:QUES?
Typical Response: +1024
See Also
STATus:QUEStionable:CONDition?
STATus:QUEStionable:ENABle?
STATus:QUEStionable:EVENt?
396 Keysight 53220A/53230A Programmer's Reference

Table of Contents

Other manuals for Keysight 53230A

Related product manuals