Keysight 53230A - Page 415

To Next Page

To Previous Page

l For the query form, specify "CURRent" (default) to read the dynamic IP address currently being used by

the instrument. Specify "STATic" to read the IP address currently stored in non-volatile memory within

the instrument (may not be the actual address used by the instrument if DHCP is enabled).

l The IP address is stored in non-volatile memory, and does not change when power has been off, after a

Factory Reset (*RST command), or after an Instrument Preset (SYSTem:PRESet command).

l The IP address is set to "169.254.2.20" (Keysight 53220A) or "169.254.2.30" (Keysight 53230A) when

the instrument is shipped from the factory or after a SYSTem:SECurity:IMMediate command.

Return Format

The query returns the IP address in the form "nnn.nnn.nnn.nnn" (the quotes are also returned).

Examples

The following example sets the IP address.

SYST:COMM:LAN:IPAD "198.105.232.101"

SYST:COMM:LAN:UPD

The following example returns the IP address currently being used by the instrument.

SYST:COMM:LAN:IPAD? CURR or SYST:COMM:LAN:IPAD?

Typical Response: "169.254.149.35"

Other manuals for Keysight 53230A