Keysight 53230A - Page 425

To Next Page

To Previous Page

l The WINS server addresses set to "0.0.0.0" (no servers) when the instrument is shipped from the factory

or after a SYSTem:SECurity:IMMediate command.

Return Format

The query returns the current WINS address in the form "nnn.nnn.nnn.nnn" (the quotes are also

returned).

Specify "CURRent" (default) to read the WINS address currently being used by the instrument. Specify

"STATic" to read the static WINS address currently stored in non-volatile memory within the instrument.

This is the address that is used if DHCP is disabled or currently unavailable. If DHCP is enabled, it will auto-

assign the WINS address, and that DHCP assigned address can be read by specifying "CURRent".

Examples

The following example sets a static primary WINS address.

SYST:COMM:LAN:WINS "198.105.232.4"

SYST:COMM:LAN:UPD

The following example returns the secondary WINS address currently being used by the instrument.

SYST:COMM:LAN:WINS2? CURR

Typical Response: "198.105.232.4"

Other manuals for Keysight 53230A