1 Interface enable and LAN Services changes take effect only after you cycle power.
2 LAN setting changes must be followed by the SYSTem:COMMunicate:LAN:UPDate command to take effect.
3 Where nnnnn represents the last 5 digits of the instrument serial number.
The Keysight 53220A/230A use the following LAN ports:
• Port 5024 is used for SCPI Telnet sessions.
• Port 5025 is used for SCPI Socket sessions.
Keysight 53220A/53230A Programmer's Reference 495
Power-On and Reset State
To Next Page
Loading...
