Commissioning
106
Pos: 97.14 /BA/Ers tinbetriebna hme/Großpacken pressen/Hydr aulischen Stütz fuß anbauen T2 @ 169\ mod_136938132900 7_78.docx @ 1 464043 @ @ 1
Attaching hydraulic hoses.
Fig.
Retracting parking jack connection
Extending parking jack connection
Collect escaping oil in a suitable container.
• Screw provided unions (8) in the parking jack.
• Unscrew the hydraulic hoses from the double nipple (9).
Note
With comfort version electronics design
The upper line is screwed on connection “a”.
The lower line is screwed on connection “b”.
For medium version electronics design
The hydraulic line marked with S1 on the hydraulic block is screwed on connection “a”.
The hydraulic line marked with S2 on the hydraulic block is screwed on connection “a”.
• Screw the hydraulic hoses (5) on the unions (8).
• Connect the hydraulic hoses on tractor side.
Checking the “Lifting / lowering drawbar” function. The hydraulic hoses (5) on the
parking jack must be replaced if the “Lifting /lowering” functions are interchanged.
• Lower the parking jack until the machine is in horizontal position.
Pos: 97.15 /La yout Module /---------------Seitenumbruch---------------- @ 0\mod_11961 75311226_0.doc x @ 4165 @ @ 1
To Next Page
Loading...
