Krone Big Pack 890 XC - Menu 1 Knotter

Terminal – Machine Functions [Medium/Comfort Version Electronics]
166
Pos: 103.47 /BA /Info-Center/CCI- ISOBUS-T erminal/CCI-BiG Pack/Grundbild H andbetrieb/ Anzeigen im Hau ptfenster/Anzeige n im Hauptf enster (III) li nke Spalte HS B aureihe T1 @ 35 1\mod_14368 79942388_78.d ocx @ 263085 9 @ @ 1
Selectable display elements
Depending on the machine configuration, the following display elements can be positioned in
the main window:
Symbol
Designation
Explanation
Current baling force as %
In manual mode.
Maximum 100 %
Current bale channel flap
pressure
In automatic mode.
In bar or PSI (depending on selected
system of units).
Current total number of
bales
The number indicates the selected
customer counter.
Current PTO speed
In min
-1
Current layer thickness
In cm or inch (depending on selected
system of units).
Current number of layers
of the last compressed
bale
Current degree of
moisture of the crops
Bale weight
Weight of the bale last weighed.
Ø
Current average weight of
the weighed bales
Current total weight of all
bales
Pos: 103.48 /BA /Info-Center/CCI- ISOBUS-T erminal/CCI-BiG Pack/Grundbild H andbetrieb/ Anzeigen im Hau ptfenster/Anzeige n im Hauptf enster (III) lin ke Spalte HS Baur eihe T2 @ 351\ mod_14368 82893725_78.d ocx @ 263111 0 @ @ 1
Symbol
Designation
Explanation
Total length of all
compressed bales
In m or ft (depending on selected system
of units)
Current number of uncut
bales
Current number of cut
bales
For machines equipped with a cutting unit.
Knot run
Is displayed briefly after a knot is tied.
If activated, a horn sounds for approx. 1
second, see chapter Terminal – Menus
"Menu 1-2, Knotter signal".
Operating hours counter
Counts only when PTO shaft is running.
Pos: 103.49 /Layo ut Module /---------------Seitenumbruch---------------- @ 0\mod_1196 175311226_0.d ocx @ 4165 @ @ 1