Krone Big Pack 890 XC - Changing the Value

Terminal – Machine Functions [Medium/Comfort Version Electronics]
164
Pos: 103.40 /BA /Info-Center/CCI- ISOBUS-T erminal/CCI-BiG Pack/Funktionst asten F1 bis F 12/Beschreib ung aller Fun ktionstasten Big PAC K T2 @ 35 1\mod_14368 63698068_78.d ocx @ 2629876 @ @ 1
Symbol
Designation
Explanation
Release starting aid
Activate starting aid
When the symbol is displayed
continuously, the starting aid is
released.
If the released starting aid is not
connected within five seconds, the
system resets the release.
Switch off starting aid
When the symbol flashes, the starting
aid is running.
When the speed of the starting aid is
reached, the system switches off the
starting aid.
Select the machine menu level
Lower the bale chute
Automatic bale ejection
If bale channel flaps opened
Implements ten bale ejections.
If bale channel flaps closed
Press once: Opens the bale channel
flaps.
Press twice: Implements ten bale
ejections.
Open the customer counter menu
Switch to automatic mode
The machine switches from manual
mode to automatic mode.
Switch to manual mode
The machine switches from
automatic mode to manual mode.
Reset current bale length to zero.
Hold down the key for two seconds.
Trigger knotter
Release blade bar
The keys , are released
on the display.
Raise the blade bar
Lower the blade bar
Close bale channel flaps
Open bale channel flaps
Pos: 103.41 /Layo ut Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.d ocx @ 4165 @ @ 1