Safety
29
Pos: 19.73 /BA/Sic herheit/1. Grun dlegende Sich erheitshinweise /Gefahren bei best. Tätigkeit en: Gefahr durc h Schweißarbeite n - Außer S elbstfahrer @ 2 44\mod_1395 756512013_7 8.docx @ 190721 0 @ @ 1
Danger associated with welding work
Improper welding work will endanger the operational safety of the machine. As a result,
accidents may occur and people may be seriously injured or killed.
• Before performing welding work on the machine, obtain the consent of KRONE customer
service and, if required, identify alternatives.
• Have welding work performed by experienced technicians only.
Pos: 19.74 /Übersc hriften/Überschrif ten 3/F-J /GGefahren bei bestimmten T ätigkeiten: Arbeit en an Räder n und Reifen @ 1 87\mod_1380 023183993_7 8.docx @ 1607 653 @ 3 @ 1
3.4.20 Dangers associated with certain activities: Working on wheels and tyres
Pos: 19.75 /BA/Sic herheit/1. Grun dlegende Sich erheitshinweise /Gefahren bei best. Tätigkeit en: Arbeiten a n Rädern und Rei fen @ 177\ mod_13732902 05171_78.doc x @ 1510669 @ @ 1
Fitting/removing wheels and tyres
Improper fitting or removal will endanger operational safety. As a result, accidents may occur
and people may be seriously injured or killed.
The fitting of wheels and tyres requires adequate knowledge and approved tools.
• If there is a lack of knowledge, have the wheels and tyres fitted by the KRONE dealer or by
a qualified tyre service.
• When fitting tyres on the wheel rims, never exceed the maximum permitted pressure
specified by the tyre manufacturers, otherwise the tyre or even the wheel rim may explode.
• When fitting the wheels, tighten the wheel nuts to the stipulated torque, see chapter
Maintenance "Tyres".
Pos: 19.76 /Übersc hriften/Üb erschriften 3/U-Z/ Verhalten in Ge fahrensituation en und bei Unf ällen @ 187\ mod_13800233 93504_78.doc x @ 1607682 @ 3 @ 1
3.4.21 Behaviour in hazardous situations and when accidents occur
Pos: 19.77 /BA/Sic herheit/1. Grun dlegende Sich erheitshinweise /Verhalten in G efahrensituati onen und bei Unfälle n @ 177\ mod_137329 1508723_78.doc x @ 1510758 @ @ 1
Neglected or incorrect procedures in hazardous situations may obstruct or prevent the rescue of
people in danger. Difficult rescue conditions will impair the chances of helping and healing the
injured.
• In principle: Switch off the machine.
• Gain an overview of the hazardous situation and identify the cause of the hazard.
• Safeguard the accident location.
• Rescue people from the danger zone.
• Withdraw from the danger zone and do not enter again.
• Alert rescue teams and, if possible, fetch help.
• Take immediate life-saving measures.
Pos: 20 /Layout M odule /---------------Seitenumbruch---------------- @ 0\mod_119617531 1226_0.docx @ 4165 @ @ 1