Krone Big Pack 890 XC - Cleaning the Running Rails; Lateral Setting of the Plunger

Settings
279
Pos: 109.20 /Übers chriften/Übersc hriften 3/F-J/FF ahren mit fe ststehender Pic k-up @ 71\ mod_130580453 5480_78.docx @ 640896 @ 3 @ 1
19.2.2 Driving with Pick-up in fixed position
Pos: 109.21 /BA /Sicherheit/8. Vor aussetzungen/H andlungsanweis ung für alle Mas chinen/Ha ndlungsanweis ung: Maschine stillse tzen u nd sichern @ 27 4\mod_14043 65253849_78.d ocx @ 2065151 @ @ 1
• Shut down and safeguard the machine, see chapter Safety -> Safety routines, "Shutting
down and safeguarding the machine".
Pos: 109.22 /BA /Einstellungen/Pic k-up / Roll enniederhalter/Fa hren mit festste hender Pick- up Bild 4x4 @ 7 1\mod_13058 05323853_78.d ocx @ 640982 @ @ 1
Fig.
180
Pos: 109.23 /BA /Einstellungen/Pic k-up / Roll enniederhalter/Fa hren mit festste hender Pick-up Text BP 4 x4 @ 302\mo d_1413971589532 _78.docx @ 2 353855 @ @ 1
The working height of the pick-up can be limited downward manually by moving the depth
limiter (1) on both sides of the machine. This makes it possible to drive the machine without
guide wheels with the pick-up in fixed position.
To perform setting:
• Open twine box (only for BiG Pack 4x4 version)
• Slightly raise the pick-up
• Open pick-up protection (3)
• Remove cotter pin (2) with disc
• Set the desired position by moving the depth limiter (1)
• Secure depth limiter by means of disc and cotter pin
Note
Make sure the depth limiter is in the same position on both sides of the pick-up.
Pos: 109.24 /Layo ut Module /---------------Seitenumbruch---------------- @ 0\mod_1196 175311226_0.d ocx @ 4165 @ @ 1