Terminal – Menus [Medium/Comfort Version Electronics]
188
Pos: 103.86 /Übers chriften/Übersc hriften 2/U-Z/ W/Wert änd ern_Terminal @ 381\mod_1 444052936020_78 .docx @ 2750 606 @ 2 @ 1
16.4 Changing the value
Pos: 103.87 /BA /Info-Center/CCI- ISOBUS-T erminal/Menüs bedienen/Wert ä ndern_drei Mögl ichkeiten @ 3 54\mod_1438 077699197_7 8.docx @ 2642977 @ @ 1
Values must be entered or changed for the settings in the menus.
There are three options for doing this:
• Using the scroll wheel.
• Press on or .
• By tapping on the blue value on the display.
If a numerical value is tapped, an input mask opens. For further information on entering
values see the supplied terminal operating instructions.
Examples:
Pos: 103.88 /BA /Info-Center/CCI- ISOBUS-T erminal/Menüs bedienen/Wert ä ndern_Bsp. Scrollr ad @ 386\ mod_144483 5358255_78.doc x @ 2765086 @ @ 1
Using the scroll wheel
• Select the required value using the scroll wheel.
The value is highlighted in colour.
• Press the scroll wheel.
An input mask opens.
• To increase or reduce the value, turn the scroll wheel.
• To save the value, press the scroll wheel.
The setting is saved and the input mask closes.
Pos: 103.89 /BA /Info-Center/CCI- ISOBUS-T erminal/Menüs bedienen/Wert ä ndern_Bsp. über Plus/Minus @ 354\mod_14 38085192278_ 78.docx @ 264 3227 @ @ 1
Using Plus/Minus
The symbol in the upper line indicates that the value has been saved.
• To increase the value, press .
• To reduce the value, press .
The symbol in the upper line disappears.
• To save the value, press .
The set value is saved.
The symbol is displayed in the upper line.
Pos: 103.90 /BA /Info-Center/CCI- ISOBUS-T erminal/Menüs bedienen/Wert ä ndern_Bsp. über den Wert @ 354\mod_143 8087387766_ 78.docx @ 264328 7 @ @ 1
Using the value
• Tap the value.
An input mask opens.
• Increase or decrease the value.
• To save the value, press OK.
The setting is saved and the input mask closes.
Pos: 103.91 /Layo ut Module /---------------Seitenumbruch---------------- @ 0\mod_1196 175311226_0.d ocx @ 4165 @ @ 1