Krone Big Pack 890 XC - Manual Lubrication Points on the Machine

Maintenance
338
Pos: 114.9 /Übersc hriften/Überschrif ten 2/U-Z/ WWartungstabelle @ 65\m od_13003694130 64_78.docx @ 583966 @ 2 @ 1
20.2 Maintenance table
Pos: 114.10 /BA /Wartung/Großp ackenpressen/ Wartungstabelle 1290 HDP II T1 @ 325\mo d_142589512 0862_78.docx @ 2501818 @ @ 1
Maintenance work
Maintenance interval
Once after 10 hours
Before the beginning of the season
Every 10 hours but at least 1x daily
Once after 50 hours
Every 50 hours
Every 200 hours
Every 500 hours
After every season
Tighten screws / nuts
All screws
X
X
Main gearbox
Oil level check
X
X
Oil change
X
X
Packer gearbox
Oil level check
X
X
Oil change
X
X
Transfer gearbox
Oil level check
X
X
Oil change
X
X
Pick-up gearbox top / bottom
(version without cutting system)
Oil level check
X
X
Oil change
X
X
Cutting system gearbox top / bottom
(version with cutting system)
Oil level check
X
X
Oil change
X
X
Angular gearbox on the drawbar front / rear
Oil level check
X
X
Oil change
X
X
Fan gearbox
X
On-board hydraulic system
Change the hydraulic oil
X
Replace the filter element of the high-pressure
filter
X
Pos: 114.11 /Layo ut Module /---------------Seitenumbruch---------------- @ 0\mod_1196 175311226_0.d ocx @ 4165 @ @ 1