Terminal – Machine Functions [Medium/Comfort Version Electronics]
177
Pos: 103.66.7 / BA/Info-Center /CCI-ISOBUS-T erminal/CCI-Bi G Pack/Grund bild Automatikb etrieb/Soll-Press kraft einstelle n (Automatikbe trieb) @ 352\mo d_143748645 9383_78.docx @ 2636177 @ 2 @ 1
14.23 Setting target force of pressure (automatic mode)
Pos: 103.66.8 / BA/Info-Center /CCI-ISOBUS-T erminal/CCI-Bi G Pack/Grund bild Automatikb etrieb/Soll-Press kraft (Automati kbetrieb)_Bild @ 352\mod_1 43755854026 7_78.docx @ 2637 377 @ @ 1
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11F11
F12
CC000091_1
2/2
0%
100%
Fig.
Pos: 103.66.9 / BA/Info-Center /CCI-ISOBUS-T erminal/CCI-Bi G Pack/Grund bild Automatikb etrieb/Soll-Press kraft (Automati kbetrieb)_Einfü hrung @ 352\ mod_1437558 554173_78.d ocx @ 2637448 @ @ 1
Force of pressure (as %)
In Automatic mode, the pressure is automatically set based on the measured plunger force. The
pressure indication on the display may fluctuate considerably. The control only functions when
the packer is supplying forage to the piston.
Value (1) and the bar display = actual force of pressure as %.
Value (2) and the marks in the bar display = target force of pressure as %.
Pos: 103.66.10 /B A/Info-Center/CCI- ISOBUS-T erminal/CCI-BiG Pack/Grun dbild Automati kbetrieb/Soll-Pre sskraft (Autom atikbetrieb)_T ext @ 381\mod_ 144404762741 6_78.docx @ 2 750025 @ @ 1
Setting the target force of pressure
Automatic mode has been selected.
• Change the value, see chapter Terminal – Menus, "Changing the value".
Pos: 103.66.11 /L ayout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_ 0.docx @ 4165 @ @ 1
To Next Page
Loading...
