Settings
300
Pos: 109.84 /Übers chriften/Übersc hriften 2/K- O/KKnoter @ 24\mod_124108 3059412_78. docx @ 24290 2 @ 2 @ 1
19.15 Knotter
Pos: 109.85 /BA /Sicherheit/7. Ge fahrenhinweise alt/Großpac kenpresse/WARNUN G - Lebe nsgefahr durc h ungewolltes Au slösen der Bin deeinrichtung. @ 273\mod_14 03694855615 _78.docx @ 20 54965 @ @ 1
WARNING!
Danger to life due to unintentional triggering of the twine tying device.
If the tying process is not locked to facilitate maintenance, adjustment and repair work on the
knotter, the tying process may be triggered unintentionally. As a result, people may be seriously
injured or killed.
• To facilitate maintenance, adjustment and repair work on the knotter, always secure the
knotter shaft with the safety lever to prevent unintentional triggering of tying.
Pos: 109.86 /BA /Einstellungen/Gr oßpackenpress e/Knoter/Bin devorgang sperre n HS @ 273\ mod_1403696 768365_78.d ocx @ 205517 0 @ 3 @ 1
19.15.1 Locking/releasing the tying process
Fig.
To avoid unintentionally triggering the tying process during maintenance, adjustment and repair
work on the knotter, the tying process must be locked.
Locking the tying process
• To lock the tying process, move the safety lever (1) from position (a) to position (b) and set
it down on the journal (2).
Releasing the tying process
• To release the tying process, move the safety lever (1) from position (b) to position (a).
Pos: 109.87 /BA /Einstellunge n/Großpackenpr esse/Bindegarn einfädeln/Hin weis Endlosballe n gepresst @ 92\mod_1326 728080272_78. docx @ 78156 0 @ @ 1
Note
The safety lever (2) must be in position (a) for the baling process! Otherwise an endless bale
will be formed when the knotter shaft is secured.
Pos: 109.88 /Layo ut Module /---------------Seitenumbruch---------------- @ 0\mod_1196 175311226_0.d ocx @ 4165 @ @ 1
To Next Page
Loading...
