Intended use 2
Supplement to Operating Instructions 150000773_00_en
BiG Pack 1270, BiG Pack 1270 XC, BiG Pack 1290, BiG Pack 1290 HDP, BiG Pack 1290 HDP XC, BiG Pack
1290 XC, BiG Pack 890, BiG Pack 890 XC
9
2 Intended use
This machine is used to bale crops.
The crops designated for the intended use of this machine are cut stalk and leaf crops.
The machine is designed exclusively for use in agriculture and may only be used when
• all safety equipment is available according to the operating instructions and is in the
protective position.
• all safety instructions of the operating instructions are observed and complied with.
The machine must only be used by people who satisfy the personnel qualification requirements
designated by the machine manufacturer. refer to page11.
These operating instructions are part of the machine and must therefore be carried along while
the machine is used. The machine may be operated only when the operator has received
training and in compliance with these operating instructions.
If the machine is used for applications which are not described in these operating instructions,
this may result in serious injuries or death and damage to the machine and other property.
Unauthorized modifications to the machine may affect the properties of the machine or disrupt
the proper operation. For this reason, unauthorized modifications shall exclude any liability of
the manufacturer for consequential damage.
The intended use shall also include the adherence to the operating, maintenance and repair
conditions set by the manufacturer.
To Next Page
Loading...
