Krone Big Pack 890 XC - Adjusting the Knotter Shaft Brake; Tensioning;Relieving the Twine Locking Shaft

Operation
267
18.4.2 Comfort Version Electronics Design
Pos: 107.32.8 / BA/Bedienung /Gr oßpackenpress e/Hydraulisc h klappbare Rolle nschurreBedi enung Rollensch urre heben/s enken (bei Au sführung Komfort) BiG PACK 8 90/1270/1290 HS Text @ 35 6\mod_14386 86506814_78.d ocx @ 2652774 @ @ 1
Using the terminal
BPHS0138
Fig.
167
The terminal can be used to lower the bale chute into the working position only.
• For version without load sensing: Actuate the control unit ( ).
• Release the mechanical lock (1) on the bale chute.
• To lower the bale chute into the working position, press .
The bale chute is raised into the transport position using the external pushbutton only.
Raising the bale chute into the transport position using the external pushbutton
2
3
Fig.
168
• Actuate the control unit ( ).
• Release the mechanical lock (1) on the bale chute.
Lowering into the working position
• To lower the bale chute into the working position, press the pushbutton (2).
Raising into the transport position
• Press the pushbutton (3) until the bale chute is at the very top.
• Close the mechanical lock (1) on the bale chute.
Pos: 107.33 /Layo ut Module /---------------Seitenumbruch---------------- @ 0\mod_1196 175311226_0.d ocx @ 4165 @ @ 1