Settings
326
Pos: 109.98.45 /B A/Einstellung en/Großpackenpre sse/Variables Füllsystem VFS/ BiG PACK 1 290 HDP II/A nschlag Tastsch winge einstell en Text Maß F pr üfen BiG PACK 1290 HDP II @ 171\mod_1 37024268669 5_78.docx @ 1 473784 @ @ 1
Checking dimension „F“:
Fig.
• Pull the feeler rocker to the stop (10).
• Determine dimension „F“ in this position, measured between grooved ball bearing and cam
disc.
The stop is adjusted properly if dimension „F“ is 5 mm.
If dimension „F“ is not 5 mm, move the stop.
If dimension “F” cannot be adjusted, the absorbing mechanism impedes the rotating path of the
feeler rocker. Adjust the brake yoke of the absorbing mechanism; refer to chapter Settings
“Absorbing Mechanism”.
Pos: 109.98.46 /L ayout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_ 0.docx @ 4165 @ @ 1
To Next Page
Loading...
