Safety
33
Pos: 23 /Überschri ften/Überschrift en 2/P-T/SSic herheitsauf kleber an der Mas chine @ 190\ mod_1381331 374791_78.docx @ 1624956 @ 2 @ 1
3.6 Safety stickers on the machine
Pos: 24 /BA/Sic herheit/2. Vorange stellte Warnhi nweise/Warnung - Beschädig te oder unlesb are Warnbildzeic hen @ 120\m od_134330578 9479_78.doc x @ 1099853 @ @ 1
WARNING!
Danger of injury on machine parts if danger zones have not been marked when warning
pictograms are missing, damaged or illegible.
Danger of injury due to dangerous parts and other residual risks as users or third parties enter
the danger area or reach into it as they are not aware of the danger.
• Immediately replace damaged or illegible labels.
• Following repair work, always attach appropriate adhesive safety labels to all the replaced,
modified or repaired components.
• Never clean areas carrying an adhesive safety label using a high-pressure cleaner.
Familiarise yourself with the statement of the warning pictograms. The adjacent text and
the selected location on the machine provide information on the special danger spots on
the machine.
Pos: 25 /BA/Sic herheit/Großpac kenpressen/Sic herheit Einfü hrung BiG Pack @ 273\mod_1 40369004325 4_78.docx @ 205 4816 @ @ 1
The KRONE BiG PACK baler is equipped with all safety devices (protective equipment).
However, it is not possible to eliminate all potential hazards on this machine as this would
impair its full functional capability. Hazard warnings are attached to the machine in the relevant
areas to warn against any dangers. The safety instructions are provided in the form of so-called
warning pictograms. Important information on the position of these safety signs and what they
mean is given below!
Pos: 26 /Layout M odule /---------------Seitenumbruch---------------- @ 0\mod_119617531 1226_0.docx @ 4165 @ @ 1
To Next Page
Loading...
