Krone Big Pack 890 XC - Position of Sensors (Left Side of Machine)

Maintenance
346
Pos: 114.33 /Übers chriften/Übersc hriften 2/A- E/AAntriebsket ten @ 27 \mod_1246 355234599_7 8.docx @ 267399 @ 2 @ 1
20.7 Drive chains
Pos: 114.34 /BA /Wartung/Antrie bsketten (Kette n)/Antriebskett en allgemein @ 107\mod_1 33456387789 2_78.docx @ 9663 87 @ @ 1
• Regularly check the pretension of the drive chains (especially on new drive chains)
• Shorten chains which have become too long by taking out a chain link
Pos: 114.35 /BA /Sicherheit/8. Vor aussetzungen/H andlungsanweis ung für alle Mas chinen/Ha ndlungsanweis ung: Maschine stillse tzen u nd sichern @ 27 4\mod_14043 65253849_78.d ocx @ 20651 51 @ @ 1
• Shut down and safeguard the machine, see chapter Safety -> Safety routines, "Shutting
down and safeguarding the machine".
Pos: 114.36 /BA /Wartung/Antrie bsketten (Kette n)/Förderwalze (I) bei Ausführu ng ohne Schnei dwerk @ 107 \mod_1334 579131627_7 8.docx @ 967455 @ 3 @ 1
20.7.1 Conveyor roller (I)
a
I
Fig.
241
Right-hand side of the machine
At the factory the spring has been preset (1) to a = 100 mm.
• Open the protective cover on the right side of the machine
• By tightening the nut (2), increase the tension of the spring (1)
• Close protective cover
Pos: 114.37 /BA /Wartung/Antrie bsketten (Kette n)/Pick-up Antrieb (II) bei Ausf ührung ohne Sc hneidwerk @ 107\mod_1 334579399032_78 .docx @ 9674 83 @ 3 @ 1
20.7.2 Pick-up drive (II)
a
II
Fig.
242
Right-hand side of the machine
At the factory the spring has been preset (1) to a = 60 mm.
• Open the protective cover on the right side of the machine
• Unscrew the counter nut (2)
• By tightening the nut (3), increase the tension of the spring (1)
• Secure the nut (3) with the counter nut (2)
• Close protective cover
Pos: 114.38 /BA /Wartung/Antrie bsketten (Kette n)/Pick-up An trieb (III) bei Ausführung ohne S chneidwerk @ 107\mod_13 34579563077 _78.docx @ 9675 11 @ 3 @ 1