Krone Big Pack 890 XC - Comfort Hydraulic Block Diagram

Settings
316
Pos: 109.96.28 /B A/Einstellung en/Großpac kenpresse/Press kolbeneinstellu ng/Rafferkupplu ng überprüfen Einrastung der B P 4x4 Baurei he bei Ausführung offener Raffer @ 302\mod_ 14139800516 90_78.docx @ 2354238 @ 3 @ 1
19.18.2 Checking Packer Coupling
Only for open packer version
Fig.
220
Note
The packer coupling is correctly engaged when the outer markings (1) on the packer
coupling correspond to the marking (2) on the cone of the packer coupling.
Pos: 109.96.29 /Üb erschriften/Üb erschriften 3/P- T/RRafferleis te in Position bring en @ 171 \mod_136999 5210446_78.doc x @ 1473367 @ 3 @ 1
19.18.3 Moving Packer Strip into Position
Pos: 109.96.30 /Üb erschriften/Z wischenüberschrif ten/K-ON ur bei Ausführ ung offener Raffer @ 324\mod_1 42546076719 8_78.docx @ 2 492337 @ @ 1
Only for open packer version
Pos: 109.96.31 /B A/Einstellung en/Großpackenpre sse/Presskolb eneinstellung/Ra fferleiste in Position bringen alle HS Typen a ußer 1290 HDP II Bild @ 1 93\mod_1382 601591739_7 8.docx @ 16413 91 @ @ 1
X
Fig.
221
Pos: 109.96.32 /B A/Einstellung en/Großpackenpre sse/Presskolb eneinstellung/Ra fferleiste in Position bringen T ext T1 all e HS TYpen auß er 1290 HDP @ 192\mod_1 382092229393_ 78.docx @ 1638 732 @ @ 1
• Turn the packer into working direction by turning the flywheel manually until the large
packer strip roller (4) running in front of the feeder strip (5) is X=6cm below the control
window (6).
• Secure the packer in this position with a mounting lever.
• Tighten the flywheel brake
Pos: 109.96.33 /L ayout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_ 0.docx @ 4165 @ @ 1