Krone Big Pack 890 XC - Operation; Preparation for Baling

Terminal – Menus [Medium/Comfort Version Electronics]
224
Pos: 103.262 /Üb erschriften/Z wischenüberschrif ten/A-E/Diagn ose Taster @ 3 87\mod_14 45266022139_78. docx @ 277 5136 @ @ 1
Diagnostics pushbutton
Pos: 103.263 /BA/I nfo-Center/ Großpackenpress e/Hauptmenüs/H auptmenü 4 Service/Diagn ose Taster_Bild und Text_BiG P ack @ 387 \mod_144526230 7519_78.docx @ 2775105 @ @ 1
CC000951
Fig.
134
When the pushbutton is pressed, the bar must be in the lower marked area of the bar display.
When the pushbutton is not pressed, the bar must be in the upper marked area of the bar
display.
Pos: 103.264 /BA/I nfo-Center/ Großpackenpress e/Hauptmenüs/H auptmenü 4 Service/Diagn ose Taster_Mög liche Taster un d Status Taster_ BiG Pac k @ 374\mod_144 2469753894_ 78.docx @ 27194 50 @ @ 1
Possible pushbuttons (depending on the machine configuration)
No.
Pushbutton
Designation
S1
S1
"Raise blade bar" pushbutton
S2
S2
"Lower blade bar" pushbutton
S3
S3
"Move in bale ejector" pushbutton
S4
S4
"Move in bale ejector" pushbutton
S5
S5
"Raise bale chute" pushbutton
S6
S6
"Lower bale chute" pushbutton
Status pushbutton
Symbol
Status
Cable break
Short circuit
5
Pressed
6
Pressed
Pos: 103.265 /La yout Module /---------------Seitenumbruch---------------- @ 0\mod_119 6175311226_0. docx @ 4165 @ @ 1