Krone Big Pack 890 XC - Knotter; Locking;Releasing the Tying Process

Operation
271
Pos: 107.43 /Übers chriften/Übersc hriften 2/P-T /SStützfuß @ 175\mod_137 2676754261_78.d ocx @ 1502 329 @ 2 @ 1
18.6 Parking Jack
Pos: 107.44 /BA /Erstinbetriebn ahme/Großpac kenpressen/Abstellst ütze/Abst ellstütze Standfl äche vergröß ern_Hinweis @ 302\mod_141 3968281921_ 78.docx @ 235350 3 @ @ 1
Note
In order to increase the base of the support jack when the ground is soft, use a suitable
support.
Pos: 107.45 /BA /Erstinbetriebn ahme/Großpac kenpressen/ Abstellstütze/Abst ellstütze Bild BiG PAck @ 17 \mod_1236319 721776_78.docx @ 204483 @ @ 1
BPXC0109_1
2
4
5
3
1
Fig.
172
Pos: 107.46 /BA /Erstinbetriebn ahme/Großpac kenpressen/Abstellst ütze/Abstellst ütze hochdre hen: @ 17\ mod_12363186 02807_78.doc x @ 204411 @ @ 1
To raise the parking support:
• As soon as the machine is connected to the tractor, turn the crank (1) several revolutions
clockwise until there is no more weight on the parking jack (3)
• Withdraw the locking bolt (5) on the lower part of the parking support (2), push in the
parking support and secure it in position (4) with the bolt
• Then crank the parking support up all the way
Pos: 107.47 /BA /Erstinbetriebn ahme/Großpac kenpressen/Abstellst ütze/Abstellst ütze runter dre hen @ 302\ mod_141397 0235361_78.doc x @ 2353794 @ @ 1
Lower the parking support (support the drawbar):
• To disconnect the machine from the tractor, first lower the raised parking support (2) a few
revolutions using the crank (1)
• Pull out the bolt (5) and lower the lower part of the parking support. Secure with bolt (5).
• Rotate the crank until the machine is relieved.
Pos: 107.48 /Layo ut Module /---------------Seitenumbruch---------------- @ 0\mod_1196 175311226_0.d ocx @ 4165 @ @ 1