Krone Big Pack 890 XC - Adjusting the Sensors; Namur Sensor D = 8 MM

Maintenance
348
Pos: 114.40 /Übers chriften/Übersc hriften 2/P-T /RReifen @ 0 \mod_1197357 995667_78.docx @ 18075 @ 2 @ 1
20.8 Tyres
Pos: 114.41 /BA /Sicherheit/7. Ge fahrenhinweise alt/Warnung - Falsche Reif enmontage @ 0\mod_11973 58162433_78.d ocx @ 18132 @ @ 1
Warning! - Tyre fitting incorrect
Effect: Injuries or damage to the machine
• Fitting tyres requires sufficient knowledge and the availability of proper tools!
• If tyres are not correctly fitted, it could explode when pumped up. This can cause serious
injury. If you do not have sufficient experience of fitting tyres, have tyres fitted by the
KRONE dealer or a qualified tyre specialist.
• When fitting tyres on the wheel rims, the maximum pressure given by the tyre manufacturer
must not be exceeded. The tyre or even the wheel rim could explode and/or burst.
• If the tyre heels do not fit properly when the maximum permitted pressure is reached, let
out the air, align tyres, lubricate the tyre heels and pump up the tyre again.
• Detailed information about how to fit tyres onto agricultural machinery can be obtained from
the tyre manufacturers.
Pos: 114.42 /BA /Wartung/Reifen/A nziehdrehm oment @ 0\ mod_11999559 05460_78.doc x @ 37340 @ @ 1
Tightening Torque
Threading
Key size in
mm
Number of bolts
per hub - pieces
Max. tightening torque
black
galvan.
M12 x 1.5
19
4/5
95 Nm
95 Nm
M14 x 1.5
22
5
125 Nm
125 Nm
M18 x 1.5
24
6
290 Nm
320 Nm
M20 x 1.5
27
8
380 Nm
420 Nm
M20 x 1,5
30
8
380 Nm
420 Nm
M22 x 1.5
32
8/10
510 Nm
560 Nm
M22 x 2
32
10
460 Nm
505 Nm
Pos: 114.43 /Layo ut Module /---------------Seitenumbruch---------------- @ 0\mod_1196 175311226_0.d ocx @ 4165 @ @ 1