Krone Big Pack 890 XC - Setting the Twine Tension on the Upper Twine Strand (Double Knotter)

Operation
269
Pos: 107.39 /BA /Bedienung /Groß packenpress e/Ballenaussc hieberBallena usschieber bedie nen, bei Ausführu ng Komfort BiG PACK 890/ 1270/1290 Text @ 356\mod_ 14386887570 58_78.docx @ 26 53157 @ @ 1
Operating the bale ejector via the operating terminal with the comfort electronics version
Fig.
170
• For version without load sensing: Actuate the control unit ( ).
The key has several functions.
If the bale channel flaps have not been actuated
• To loosen the bale channel flaps, press .
If the bale channel flaps have been actuated
• To execute 10 bale ejections, press .
• Repeat the process until all tied bales are out of the bale channel.
• Pull the last bale manually off the bale chute.
Pos: 107.40 /Layo ut Module /---------------Seitenumbruch---------------- @ 0\mod_1196 175311226_0.d ocx @ 4165 @ @ 1
BPHS0138