Krone Big Pack 890 XC - Recurring Icons

Terminal – Machine Functions [Medium/Comfort Version Electronics]
162
Pos: 103.31 /BA /Info-Center/A LLE Terminals i n einem - ISOBU S, Delta, BET A II (ab BJ 15/ 16)/ALLE Ter minals/Übergr eifend über alle M aschinen/Displa y-Aufbau_Sta tuszeile_Text_ ALLE Terminals @ 354\mod_1 43817988353 6_78.docx @ 26 45443 @ @ 1
The status line (1) in the display shows current states of the machine (depending on
equipment):
Pos: 103.32 /BA /Info-Center/CCI- ISOBUS-T erminal/CCI-BiG Pack/Grundbild H andbetrieb/ Statuszeile BiG PACK/Statusz eile (I) oberste Zeil e HS und 129 0 HDP II Baurei he @ 350\ mod_1436790 936114_78.docx @ 2628676 @ @ 1
Symbol
Designation
Explanation
Alarm message is
pending
Bale chute up
Bale chute down
Blades are active:
Cutting in progress.
Blades are inactive
No cutting in progress.
Axle locked
Axle released
Bale ejector out
Bale ejector in
Machine duty
Flashing: low load
Black background: max. load
If the depressed symbol does not have a
black background, check the "Packer
feed" sensor.
Setting down bales
Silage additive system
OFF
Silage additive system
ON
Bale channel flaps open
The symbol flashes.
Bale channel flaps closed
Pos: 103.33 /Layo ut Module /---------------Seitenumbruch---------------- @ 0\mod_119617531 1226_0.doc x @ 4165 @ @ 1