Krone Big Pack 890 XC - Page 277

Settings
277
Pos: 109.6 /Übersc hriften/Überschrif ten 2/P-T/P Pick up @ 1\mod_12017 91975201_0.doc x @ 54586 @ 2 @ 1
19.1 Pick-up
Pos: 109.7 /BA/Sic herheit/Pic k-up / Rollennied erhalter/Warn ung - Arbeiten a n bzw. unter der Pick-up @ 274\mod_140421 5879490_78.d ocx @ 206086 6 @ @ 1
WARNING!
Risk of injury due to unintentional movement of the pick-up!
If the pick-up is not secured by the stop cock, the pick-up may move unintentionally. As a result,
people may be seriously injured.
• When working on or under the pick-up, always secure the pick-up by moving the stop cock
on the left side of the machine to prevent it from being unintentionally lowered, see chapter
Safety "Stop cock for pick-up".
Pos: 109.8 /Übersc hriften/Übers chriften 2/F-J /GGrundeinstell ung (einstellen d er Arbeitshöhe) @ 19\mod _1238576636385 _78.docx @ 221585 @ 2 @ 1
19.2 Default Setting (Working Height Setting)
Pos: 109.9 /BA/Ei nstellungen/Pic k-up / Rolle nniederhalter/ Pick-up Grundein stellung Bild Big Pack 1290 XC / 1270 XC/ 890 XC @ 304\ mod_14144866 25480_78.doc x @ 2360901 @ @ 1
Fig.
178
Pos: 109.10 /BA /Sicherheit/8. Vor aussetzungen/H andlungsanweis ung für alle Mas chinen/Ha ndlungsanweis ung: Maschi ne stillsetzen und sichern @ 27 4\mod_14043 65253849_78.d ocx @ 2065151 @ @ 1
• Shut down and safeguard the machine, see chapter Safety -> Safety routines, "Shutting
down and safeguarding the machine".
Pos: 109.11 /BA /Einstellungen/Pic k-up / Roll enniederhalter/Pic k-up Grundei nstellung Te xt mit Federstec ker @ 20\mod_ 1238577186541_ 78.docx @ 2 21681 @ @ 1
The working height can be adjusted on the guide wheels (3) on either side of the pick-up. In
order to carry out the adjustment, lift and secure the pick-up. Pull the spring cotter pin (2) and
move the guide wheels into the desired position on the perforated bar (1). Secure the guide
wheels in place with the spring cotter pin.
Note
Make certain that the guide wheels on either side of the pick-up are in the same position on the
perforated bar.
Pos: 109.12 /Layo ut Module /---------------Seitenumbruch---------------- @ 0\mod_1196 175311226_0.d ocx @ 4165 @ @ 1