Krone Comprima F 155 XC - EC Declaration of Conformity

Table of Contents
2
Pos: 1 /BA/Ko nformitätserkläru ngen/Rundballe npressen/C omprima F/V XC_R P025 @ 505\ mod_14992 62432702_78.d ocx @ 3475186 @ @ 1
EC Declaration of Conformity
We
Maschinenfabrik Krone Beteiligungs-GmbH
Heinrich-Krone-Str. 10, D-48480 Spelle
hereby declare as manufacturer of the product named below, on our sole responsibility,
that the
Machine: Round Baler
Series: RP701-10, RP701-11,
RP701-20, RP701-21,
RP701-30, RP701-31,
RP701-40, RP701-41,
RP701-51
to which this declaration refers is in compliance with the following relevant provisions of:
• EC Directive 2006/42/CE (machines),
• EU Directive 2014/30/EU (EMC). Within the meaning of the Directive the
harmonised standard EN ISO 14982:2009 was taken as a basis.
The signing Managing Director is authorised to compile the technical documents.
Spelle, 01.08.2017
Dr.-Ing. Josef Horstmann
(Managing Director, Design & Development)
Year of manufacture:
Machine no.:
Pos: 2 /Layout Mo dule /---------------Seitenumbruch---------------- @ 0\mod_1196175311 226_0.docx @ 4165 @ @ 1