Operation
125
Pos: 48.15 /BA/Be dienung /Ru ndballenpresse/Balle nkammer b efüllenBallen kammer befüllen @ 55\mod_ 12941450262 50_78.docx @ 52 6912 @ 2 @ 1
11.3 Filling the bale chamber
Fig.
To attain a consistent bale density inside a round bale, the bale chamber should be filled
evenly. The swath width is an important factor here.
The swath width is optimal if the swath has exactly the same width as the bale chamber.
If the swath is wider than this, distortion of the round bales may result. The round bale will be
frayed on the sides and difficult to eject from the bale chamber.
If the swath is narrow, the bale chamber can be filled evenly only by driving onto the swath from
alternate sides (left/right). Do not zigzag: drive long distances on the left and right side of the
swath as shown in the illustration. Too frequent changes and uneven filling of the bale chamber
will produce barrel-shaped round bales and uneven bale density.
The reached diameter can be read off the monitor of the operation terminal.
Pos: 48.16 /BA/Be dienung /Ru ndballenpresse/Pr essdruck einstelle nerreicht er Pressdruck @ 1 58\mod_1 364469090060_ 78.docx @ 13 90690 @ @ 1
The baling pressure that is reached can be read on the baling pressure indicator on the left side
of the machine.
Note
Overloading the machine with bales that are too tight or too large can result in serious damage
to the machine. The machine has a mechanism that triggers forced tying automatically in case
of overload. Each forced tying is automatically documented.
Pos: 48.17 /Ab kürzungen /Abkürz ungen sprac hneutral/Rundb allenpressen/Co mprima V @ 25 6\mod_139 7714229979_ 0.docx @ 196267 0 @ @ 1
Comprima V
Pos: 48.18 /BA/Be dienung /Ru ndballenpresse/Balle nkammer b efüllenHinweis Ballenkammer b efüllen n ur Ultima @ 316 \mod_142252506 8841_78.docx @ 2445763 @ @ 1
Note
Barrel-shaped round bales can cause damage to the floor conveyor. Distorted and thick round
bales are detrimental to proper silage production.
Pos: 48.19 /La yout Module /--------- ------Seitenumbruch---------------- @ 0\mod_1196175311226 _0.docx @ 4165 @ @ 1
To Next Page
Loading...
