Krone Comprima F 155 XC - 13.2 Maintenance table

Maintenance
206
Pos: 52.7 /Übersc hriften/Übersc hriften 2/U-Z/ W/Wartungst abelle @ 65\mo d _1300369413064 _78.docx @ 58 3966 @ 2 @ 1
13.2 Maintenance table
Pos: 52.8 /BA/W artung/Rundball enpresse/Wart ungstabellen/ Wartungstabelle _Comprima F V RP 025 @ 510\ mod_150167 3911067_78.doc x @ 3497076 @ @ 1
Maintenance interval
Machine Part
Oil change
Check
Adjustment
Venting
Retightening
After the first 8 operating
hours and each time a wheel
is changed
Wheels, wheel nuts
X
After extended downtimes
Friction clutch of the universal
shaft
X
At the beginning of the
season (after approx. 5
round bales)
Chain tension of bale formation
conveyor drive
X
X
Chain tension of bale formation
conveyor
X
X
Chain tension of pick-up drive
X
X
Chain tension of roller drive
X
X
Every 500 operating hours
Gearbox
X
After every season
X
After first use and then after
every 1000 round bales
Floor conveyor tension
X
X
Pos: 52.9 /BA/W artung/Hinweis V erschleiß verringer n @ 0\ mod_119995350 5303_78.doc x @ 37204 @ @ 1
Note
To ensure problem-free operation of the machine and to reduce wear and tear, specific
maintenance and upkeep intervals must be observed. These include cleaning, greasing,
lubricating and oiling parts and components.
Pos: 52.10 /La yout Module /---------------Seitenumbruch---------------- @ 0\mod_11961 75311226_0.doc x @ 4165 @ @ 1