Krone Comprima F 155 XC - 8.1.8 Sensor Test Analogue

KRONE Operation Unit Alpha
100
Pos: 42.44 /Übersc hriften/Überschrif ten 3/P-T/S Sensortest a nalog @ 55\mo d_129475268 8031_78.docx @ 534158 @ 3 @ 1
8.1.8 Sensor Test Analogue
Pos: 42.45 /WHB/ Elektrik/Rundballe npresse/Alph a (Medium)/S ensortest analog @ 83\mo d_131710879 0120_78.docx @ 7 26807 @ @ 1
The function of the rotary potentiometer is checked in the analogue sensor test.
AB CD EF GH
2
3
6
7
8
10
RPM00009
Fig.
74
1. When switching operation on, keep the key pressed.
The pilot lamp (6) flashes quickly.
The pilot lamp (7) lights up.
2. Actuate key.
3. Move the engine by using or keys.
The current value of the rotary potentiometer is shown in the bar graph (11). This value must
change when the motor is moved.
Note
You can use the and keys to switch back and forth between “Sensor Test /
Analogue” and “Sensor Test / Digital”.
Pos: 42.46 /La yout Module /---------------Seitenumbruch---------------- @ 0\mod_11961 75311226_0.doc x @ 4165 @ @ 1