Krone Comprima F 155 XC - 11.3.3 Mounting additional deflector sheets in the tailgate

Operation
128
Pos: 48.32 /Übersc hriften/Überschrif ten 3/U-Z/Z usätzliche Aus wurfbleche in der Heckklapp e montieren @ 489\mod_148 4052728157_ 78.docx @ 328757 0 @ 3 @ 1
11.3.3 Mounting additional deflector sheets in the tailgate
Pos: 48.33 /Ab kürzungen /Abkürz ungen sprac hneutral/Rundb allenpressen/Co mprima F @ 256 \mod_1397 714206905_0.d ocx @ 19626 42 @ @ 1
Comprima F
Pos: 48.34 /BA/Be dienung /Ru ndballenpresse/Anl agebleche/A uswurfbleche in d er Heckklappe montieren_Ta belle ET-Nu mmer_alle bis a uf V 210 @ 510\ mod_150160 1165709_78.d ocx @ 349610 8 @ @ 1
Use the following order numbers to order the deflector sheets:
KRONE component
Order number
Deflector sheets 2x
275 479 *
Pos: 48.35 /BA/Be dienung /Ru ndballenpresse/Anl ageblecheBild Anlagebleche montieren Com prima F125/ 155 @ 137\m od_13539127 45760_78.doc x @ 1222811 @ @ 1
RPN00107_1
1
2
3
Fig.
98
View (closed bale chamber)
Pos: 48.36 /BA/Be dienung /Ru ndballenpresse/Anl agebleche/Text Anlageblech e montieren alle Maschinen @ 510\mod_ 1501601365137_ 78.docx @ 3 496140 @ @ 1
If the finished round bales do not fall out of the front bale chamber, two deflector sheets (1) can
be attached to the right and left sides of the machine tailgate.
• Attach the deflector sheets (1) to the inside of the bale chamber by screwing the screws (2)
into the available boreholes.
• If, after mounting the deflector sheets (1), the finished round bales still do not fall out of the
front bale chamber, remove the right and left slide sheets (3) from the machine housing.
Pos: 48.37 /La yout Module /---------------Seitenumbruch---------------- @ 0\mod_11961 75311226_0.doc x @ 4165 @ @ 1