Krone Comprima F 155 XC - Page 129

Operation
129
Pos: 48.38 /Ab kürzungen /Abkürz ungen sprac hneutral/Rundb allenpressen/Co mprima V 150 ( XC) @ 402\ mod_1447939 350450_0.doc x @ 2846778 @ @ 1
Comprima V 150 (XC)
Pos: 48.39 /Ab kürzungen /Abkürz ungen sprac hneutral/Rundb allenpressen/Co mprima V 180 ( XC) @ 402\ mod_1447939 470885_0.doc x @ 2846809 @ @ 1
Comprima V 180 (XC)
Pos: 48.40 /BA/Be dienung /Ru ndballenpresse/Anl agebleche/A uswurfbleche in d er Heckklapp e montieren_ Tabelle ET-Nu mmer_alle bis a uf V 210 @ 51 0\mod_150160 1165709_78.d ocx @ 349610 8 @ @ 1
Use the following order numbers to order the deflector sheets:
KRONE component
Order number
Deflector sheets 2x
275 479 *
Pos: 48.41 /BA/Be dienung /Ru ndballenpress e/AnlageblecheBild Anlageblech e montieren CV 150 @ 137\ mod_1353936 023004_78.docx @ 1224121 @ @ 1
HDC00067
1
2
HDC00063
3
Fig.
99
Pos: 48.42 /BA/Be dienung /Ru ndballenpresse/Anl agebleche/Text Anlageblech e montieren alle Maschinen @ 510\mod_ 1501601365137_ 78.docx @ 3 496140 @ @ 1
If the finished round bales do not fall out of the front bale chamber, two deflector sheets (1) can
be attached to the right and left sides of the machine tailgate.
• Attach the deflector sheets (1) to the inside of the bale chamber by screwing the screws (2)
into the available boreholes.
• If, after mounting the deflector sheets (1), the finished round bales still do not fall out of the
front bale chamber, remove the right and left slide sheets (3) from the machine housing.
Pos: 48.43 /La yout Module /---------------Seitenumbruch---------------- @ 0\mod_11961 75311226_0.doc x @ 4165 @ @ 1