Maintenance - hydraulic system
266
Pos: 56.13 /Übersc hriften/Überschrif ten 2/K-O/M /Magnetventile @ 473\mod _1472641954 589_78.doc x @ 3200144 @ 2 @ 1
15.3 Solenoid valves
Pos: 56.14 /BA/ Wartung/Rundballe npresse/Hydra ulik/Nothandb edienung/Mag netventil bedie nen_bild_Compri ma RP025 @ 4 96\mod _1489566134033_ 78.docx @ 34 04185 @ @ 1
Fig.
Pos: 56.15 /BA/ Wartung/Rundballe npresse/Hydra ulik/Nothandb edienung/Mag netventil bedie nen_text_Comprim a RP025 @ 496\mod_ 1489566247964 _78.docx @ 340 4447 @ @ 1
The solenoid valves (1) are situated on the left side of the machine behind the side hood.
For the "Hydraulic blade group control system" version
The solenoid valves (1) are situated on the right side of the machine behind the side hood.
If the comfort electronics fails, the pick-up can be raised and lowered with the solenoid valve (2)
and the blade cassette raised or lowered with the solenoid valve (3) in the event of an
emergency.
To raise or lower the pick-up or the blade cassette in the event of an emergency:
• Screw in the respective knurled head screw (4) until the pick-up or the blade cassette can
be directly raised or lowered by the regulating valve at the tractor.
If the comfort electronics operates properly again:
• Unscrew the knurled head screws (4).
The pick-up and the blade cassette can be operated via the terminal.
Pos: 56.16 /La yout Module /---------------Seitenumbruch---------------- @ 0\mod_11961 75311226_0.doc x @ 4165 @ @ 1
To Next Page
Loading...
