Krone Comprima F 155 XC - Connecting the terminal; 1.1 Connecting KRONE Beta II terminal

Connecting the terminal 1
Connecting KRONE Beta II terminal 1.1
RP701-10 , RP701-11 , RP701-20 , RP701-21 , RP701-30 , RP701-31 , RP701-40 , RP701-41 , RP701-51
Comfort 1.0_en 3
1 Connecting the terminal
1.1 Connecting KRONE Beta II terminal
NOTICE
Short circuit caused by impurities and moisture in the plug connection
The machine may be damaged by a short circuit.
 Make sure that the plugs and sockets are clean and dry.
INFORMATION
To mount the terminal in the tractor cabin, observe the provided operating instructions of
terminal.
Tractors with integrated ISOBUS system
EQ003-120
ü The machine is shut down and safeguarded, see chapter Safety, "Shutting down and
safeguarding the machine".
Connection terminal to tractor
INFORMATION
The cable (3) can be ordered by stating the order number 20085988*.
 Connect the 8-pin plug(2) of the cable(3) to the 8-pin socket(1) (CAN1-IN) of the terminal.
 Connect the 9-pin plug (4) of the cable (3) to the 9-pin socket (5) (In-cab).