Krone Comprima F 155 XC - 7.22 Menu 10 “Manual operation” (for the “Net and chamber film wrapping” version)

7 Terminal menus
7.22 Menu 10 “Manual operation” (for the “Net and chamber film wrapping” version)
52
RP701-10 , RP701-11 , RP701-20 , RP701-21 , RP701-30 , RP701-31 , RP701-40 , RP701-41 , RP701-51
Comfort 1.0_en
Moving the tying actuator
 To move the tying actuator to the feed position, press
or .
 To move the tying actuator to the cutting position, press
or .
 To move the tying actuator to the tying position, press
or .
Enable/disable twine coupling
Use the twine coupling to set twine distribution on the round bale.
 Press
.
Æ Twine coupling is enabled/disabled. The key indicates the current status.
The following status displays are possible at the key:
Icon Explanation
Twine coupling disabled
Twine coupling enabled
7.22 Menu 10 “Manual operation” (for the “Net and chamber film
wrapping” version)
10
n
EQG003-007
ü For The menu level is active, refer to page36.
 To open the menu, press
.
Æ The display shows menu “Manual operation”.
The following status displays may appear on the screen: