Safety
27
Pos: 14.72 /BA/Sic herheit/1. Gru ndlegende Sic herheitshinw eise/Gefahren bei best. Tätigkeit en: Gefahr durc h Schweißarb eiten_angehängt e und angeba ute Maschinen @ 455\mod_ 146417794690 2_78.docx @ 3 084094 @ @ 1
Danger associated with welding work
Improper welding work will endanger the operational safety of the machine. As a result,
accidents may occur and people may be seriously injured or killed.
• Never weld on the following parts:
– Gearbox
– Parts of hydraulics
– Parts of the electronics
– Frame supporting component groups
• Before performing welding work on the machine, obtain the consent of KRONE customer
service and, if required, identify alternatives.
• Have welding work performed by experienced technicians only.
• Mount the earthing of the welding device near the welding points.
• Be careful when carrying out welding work near electrical and hydraulic parts, plastic parts
and pressure accumulators. The parts may be damaged, endanger people or cause
accidents.
Pos: 14.73 /Übersc hriften/Überschrif ten 3/F-J /GGefahren bei bestimmten T ätigkeiten: Arbeit en an Räder n und Reifen @ 1 87\mod_1380 023183993_7 8.docx @ 1607 653 @ 3 @ 1
3.4.21 Dangers associated with certain activities: Working on wheels and tyres
Pos: 14.74 /BA/Sic herheit/1. Grun dlegende Sich erheitshinweise /Gefahren bei best. Tätigkeit en: Arbeiten an R ädern und Reife n_Wender_Sc hwader_R P_LW_BP_Tr anspwagen @ 45 5\mod_14641 79424347_78. docx @ 30842 48 @ @ 1
Improper assembly or disassembly of wheels and tyres may endanger operational safety. As a
result, accidents may occur and people may be seriously injured or killed.
The fitting of wheels and tyres requires adequate knowledge and approved tools.
• If there is a lack of knowledge, have the wheels and tyres fitted by the KRONE dealer or by
a qualified tyre service.
• When fitting tyres on the wheel rims, never exceed the maximum permitted pressure
specified by KRONE. The tyre or even the wheel rim could explode and/or burst, see
chapter “Technical Data”.
• When fitting the wheels, tighten the wheel nuts to the stipulated torque, see chapter
Maintenance, “Tyres”.
Pos: 14.75 /Übersc hriften/Überschrif ten 3/U-Z/ Verhalten in Ge fahrensituation en und bei Unf ällen @ 187\ mod_13800233 93504_78.doc x @ 1607682 @ 3 @ 1
3.4.22 Behaviour in hazardous situations and when accidents occur
Pos: 14.76 /BA/Sic herheit/1. Grun dlegende Sich erheitshinweise /Verhalten in G efahrensituati onen und bei Unfälle n_fuer alle @ 177 \mod_1373 291508723_7 8.docx @ 1510 758 @ @ 1
Neglected or incorrect procedures in hazardous situations may obstruct or prevent the rescue of
people in danger. Difficult rescue conditions will impair the chances of helping and healing the
injured.
• In principle: Switch off the machine.
• Gain an overview of the hazardous situation and identify the cause of the hazard.
• Safeguard the accident location.
• Rescue people from the danger zone.
• Withdraw from the danger zone and do not enter again.
• Alert rescue teams and, if possible, fetch help.
• Take immediate life-saving measures.
Pos: 15 /Layout M odule /---------------Seitenumbruch---------------- @ 0\mod_119617531 1226_0.docx @ 4165 @ @ 1
To Next Page
Loading...
