Operation
135
Pos: 48.70.9 /Üb erschriften/Üb erschriften 3/P- T/P/Höhe der Pic k-up präziser einstellen @ 4 96\mod_1489 651252726_78. docx @ 34050 86 @ 3 @ 1
11.9.2 Adjusting the pick-up height more precisely
Pos: 48.70.10 / BA/Einstellunge n/Pick-up / Roll enniederhalter /Höhe der Pic k-up präziser eins tellen_Bild1_C omprima CF CV R P025 @ 49 5\mod_14894 20189610_78.d ocx @ 340295 9 @ @ 1
Fig.
Pos: 48.70.11 / BA/Einstellunge n/Pick-up / Roll enniederhalter /Höhe der Pic k-up präziser eins tellen_Text2 _Comprima CF CV RP025 @ 496\mod_14894 20997871_78.d ocx @ 3403 019 @ @ 1
In case of extreme ground conditions, it is possible to additionally adjust the pick-up height via
the chain (2). To do so, the pick-up can either be set one full chain link higher or lower or even
more precisely via the chain keep (1).
Prerequisite
– The pick-up is raised using the tractor hydraulics.
– The guide wheels are positioned upwards.
Set the chain (2) identically on the left and right side of the machine:
• Hook in the chain (2) either one full chain link higher or lower or hook the desired chain link
in position (I), (II) or (III).
Pos: 48.70.12 / BA/Einstellunge n/Pick-up / Roll enniederhalter /Hinweis Pic k-up Einsatz in Str oh @ 67\mod_ 13025253532 18_78.docx @ 617429 @ @ 1
Note
When used in straw, the pick-up should be set as high off the ground as possible.
Use the chain (2) to adjust the pick-up guide wheels in that way that they do not touch the
ground.
Note
If the pick-up is hooked in higher, the height of the drawbar must be adjusted
(see Chapter entitled Start-up “Adapt Drawbar Height”).
Pos: 48.70.13 / Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196 175311226_0. docx @ 4165 @ @ 1
To Next Page
Loading...
