Krone Comprima F 155 XC - 8.1.6.6 Approaching Tying Position

KRONE Operation Unit Alpha
98
Pos: 42.38 /Übersc hriften/Überschrif ten 4/A-E/ Anfahren Bi ndeposition @ 55\mod_1294 751889406_78. docx @ 534054 @ 4 @ 1
8.1.6.6 Approaching Tying Position
Pos: 42.39 /WHB/ Elektrik/Rundballe npresse/Alph a (Medium)/A nfahren der Bin deposition @ 83 \mod_1317 106171654_7 8.docx @ 72661 1 @ @ 1
The motor should not be moved to the tying position again until after the values for the feed and
cut-off position have been set.
AB CD EF GH
2
3
6
7
8
10
RPM00008
Fig.
72
1. Use the key to move the engine to the tying position.
Note
No further adjustments can be made to the feed and cut-off position.
The pilot lamp for type of tying “Twine” (5) flashes quickly.
The pilot lamp for type of tying “Net” (4) and the pilot lamp manual mode (7) light up.
Pos: 42.40 /La yout Module /---------------Seitenumbruch---------------- @ 0\mod_11961 75311226_0.doc x @ 4165 @ @ 1