Krone Comprima F 155 XC - 7.25.1.1 Adjusting sensor B08 “Top blade cassette”

Terminal menus 7
Menu 15 "Settings" 7.25
RP701-10 , RP701-11 , RP701-20 , RP701-21 , RP701-30 , RP701-31 , RP701-40 , RP701-41 , RP701-51
Comfort 1.0_en 61
Possible status displays of the sensors
Icon Designation
0
Sensor ready to operate
1
Sensor attenuated (metal in front of the sensor)
2
Sensor unattenuated (no metal in front of the sensor)
7
Cable break or short circuit
8
Defect in sensor or job computer
20 Cable break
21
Short circuit
7.25.1.1 Adjusting sensor B08 “Top blade cassette”
RP000-053
15-1
1
state:
5,0V
1,5V
1,0V
1,0V
1,0V
B08
B09
L
B05
EQ003-113
SensorB08 “Blade cassette up”(3) is located on the left side of the machine in the bottom part.
The green bar in menu 15-1 “Sensor test” shows the saved value. The black bar shows the
current value of the sensor. As soon as a new value is saved, the green bar is adjusted to the
black one.