Krone Comprima F 155 XC - 6.6 Adjusting bale diameter

Terminal machine functions 6
Adjusting bale diameter 6.6
RP701-10 , RP701-11 , RP701-20 , RP701-21 , RP701-30 , RP701-31 , RP701-40 , RP701-41 , RP701-51
Comfort 1.0_en 31
The terminal switches automatically to the Road travel screen after roughly fiveminutes when
the following requirements are met:
ü The PTO shaft is switched off.
ü The tailgate is closed.
ü The machine is in field mode.
6.6 Adjusting bale diameter
Comprima V
125
cm
1
160
140
120
100
80
100%
5
∑
1
126 cm
160
140
120
100
80
125
cm
126 cm
1
2
EQG003-037
1 Adjusted target bale diameter in cm 2 Actual bale diameter in cm
Adjusting the bale diameter via the scroll wheel
 Select the blue value to be changed using the scroll wheel.
ð The icon is shown in reverse colours.
 Press the scroll wheel.
ð An input field opens.
 To increase or reduce the value, turn the scroll wheel.
 To save the value, press the scroll wheel.
ð The setting is accepted, the input field closes.
Adjusting the bale diameter via the touch-capable display
 Tap the blue value to be changed.
ð An input field opens.
 Enter the desired value and press
.
ð The value is saved and the input field exited.