Terminal machine functions 6
Status line 6.1
RP701-10 , RP701-11 , RP701-20 , RP701-21 , RP701-30 , RP701-31 , RP701-40 , RP701-41 , RP701-51
Comfort 1.0_en 25
6 Terminal machine functions
WARNING
Personal injuries and/or machine damage caused by non-compliance of error
messages
If error messages are ignored and the malfunction is not remedied, people may be injured
and/or the machine may be damaged seriously.
Remedy the malfunction when the error message is displayed, refer to page71.
If the malfunction cannot be remedied, consult a KRONE service partner.
6.1 Status line
INFORMATION
Using a terminal with a resolution of less than 480x480 pixels.
On terminals with a resolution of less than 480x480 pixels, only 7 fields are displayed in the
status line. Thus, not all icons for the status line are shown.
On terminal with a resolution of more than/equal to 480x480 pixels, 8 fields are shown in the
status line.
EQ000-901
Icons displayed with shading (
) can be selected. If an icon with shading is selected:
• a window with further information opens or
• a function is activated or deactivated.
The status line shows the current states of the machine (depending on how it is equipped):
Icon Explanation
One or more error messages are pending.
For “touch-capable display” version: When you press this icon, a window opens
with the pending error messages, refer to page71.
Blade swivelled on.
Blades not swivelled in.
Pre-signalling set.
To Next Page
Loading...
