Krone Comprima F 155 XC - 7.20 Menu 10 Manual operation (for the Net wrapping version)

7 Terminal menus
7.20 Menu 10 "Manual operation" (for the "Net wrapping" version)
50
RP701-10 , RP701-11 , RP701-20 , RP701-21 , RP701-30 , RP701-31 , RP701-40 , RP701-41 , RP701-51
Comfort 1.0_en
7.20 Menu 10 "Manual operation" (for the "Net wrapping" version)
10
n
+
-
EQG003-006
ü For The menu level is active, refer to page36.
 To open the menu, select
.
Æ The display shows menu “Manual operation”.
The following status displays may appear on the screen:
Icon Explanation
Tying actuator is in feed position.
Tying actuator is in cutting position.
Tying actuator is in tying position.
Position is not defined.
The keys on the sides can be used to control the following functions:
Icon Explanation
Move tying actuator to feed position
Move tying actuator to cutting position
Move tying actuator to tying position
Moving the tying actuator
 To move the tying actuator to the feed position, press
.
 To move the tying actuator to the cutting position, press
.
 To move the tying actuator to the tying position, press
.