Krone Comprima F 155 XC - 8.1.5 Operating Machine Functions; 8.1.5.1 Operation of Tying (Manual Mode)

KRONE Operation Unit Alpha
93
Pos: 42.17 /Übersc hriften/Überschrif ten 2/K-O/M /Maschinenf unktionen be dienen @ 362\m od_1439558020 977_78.docx @ 2670252 @ 3 @ 1
8.1.5 Operating Machine Functions
Pos: 42.18 /Übersc hriften/Überschrif ten 4/A-E/ Betätigung der Bi ndung (Han dbetrieb) @ 82\ mod_131703 0153480_78.doc x @ 724866 @ 4 @ 1
8.1.5.1 Operation of Tying (Manual Mode)
Pos: 42.19 /WHB/ Elektrik/Rundballe npresse/Alph a (Medium)/B etätigung der Bindung (Handbetrie b) @ 82 \mod_13170293 43382_78.doc x @ 724838 @ @ 1
In the manual mode, tying must be released manually each time.
AB CD EF GH
2
3
6
7
8
10
RPM00006
Fig.
66
1. Actuate key.
The pilot lamp for manual mode (7) lights up.
The pilot lamp for type of tying “Net” (4) or the pilot lamp for type of tying “Twine” (5) lights up.
As soon as the round bale has reached the baling pressure (Comprima F 125/F 155) or bale
diameter (Comprima V 150/V 180) preselected on the preselection indicator of the round baler,
a horn is sounded and the pilot lamps (12) light up. The round bale can then be wrapped.
2. Actuate key.
The tying or wrapping process runs automatically.
3. After the tying or wrapping process has been completed, open the tailgate with the second
control valve using the tractor controls.
4. Eject bale.
Pos: 42.20 /La yout Module /---------------Seitenumbruch---------------- @ 0\mod_11961 75311226_0.doc x @ 4165 @ @ 1