Krone Comprima F 155 XC - 11.19.4 Inserting Sheet

Operation
165
Pos: 48.99.30 / BA/Bedienung /R undballenpresse/N etzbindung _nur Ausführung N etzbindung a b 17 18/Hin weis zu Netzbin dung_Augen in der Abbild ung_Verweis auf Bindematerialbre mse @ 513\m od_15034808 84657_78.doc x @ 3530043 @ @ 1
Note
The lug symbols in the picture indicate important points where you need to proceed differently
when inserting a net than when inserting a film.
– For net wrapping, the clamping lever (12) must touch and guide the net roll (1). To this
end, the wrapping material brake must be set, see chapter Settings, "Setting the wrapping
material brake".
Pos: 48.99.31 /Ü berschriften/Ü berschriften 3/F- J/F/Folie einl egen @ 75\m od_1309262337 743_78.docx @ 660953 @ 3 @ 1
11.19.4 Inserting Sheet
Pos: 48.99.32 / BA/Sicherheit/ 7. Gefahrenhinw eise alt/Rundballe npresse/Warn ung Messer N etz einlegen CF/CV @ 308\ mod_1416899 786255_78.docx @ 2390286 @ @ 1
WARNING! - Risk of Cuts Due to Sharp Cutters!
Serious injuries; especially to hands.
• Wear protective gloves when working in the area of the blades and the blade bar
• Wear also protective gloves when threading in or removing the net
Pos: 48.99.33 / Beipacks/Rundball enpressen/Foli enbindung/M odulgruppen Foli e einlegen / L ED Lichtleiste/Hi nweise: KRONE Folie ver wenden @ 514\ mod_15040872 78849_78.doc x @ 3534636 @ @ 1
Note
For trouble-free use in the field, KRONE recommends one of the "KRONE excellent" films, see
label at the machine with the number 27 018 640 *.
Pos: 48.99.34 / BA/Bedienung /R undballenpresse/N etz- un d Folienbindung_A usführung N etz- und Folien bindung ab 17 18 /Terminal Foli enbindung ausg ewählt_Vorausset zung @ 51 3\mod_15036 48472794_78.doc x @ 3532641 @ @ 1
Prerequisite
– Chamber film wrapping has been selected, see chapter Terminal – Menus, Menu 8 "Tying
type selection".
Pos: 48.99.35 / BA/Bedienung /R undballenpresse/ Folienbind ung/Netz- oder F olienrolle einl egen_Netzschwi nge nach vorn fahren_bild F olienbindung_alle C omprima @ 513\mod_15 03480293996_7 8.docx @ 353 0011 @ @ 1
COM00480_1
1
2
3
Fig.
137
Pos: 48.99.36 / BA/Bedienung /R undballenpresse/ Folienbind ung/Folie/Netz einlegen_Netzsch winge nach vorn fahren_text _alle Compri ma @ 513\ mod_150305473659 6_78.docx @ 3 509463 @ @ 1
• Move the feed rocker arm (3) with the terminal forward until the distance dimension
between the pressure axis covered in red foam wadding (2) and the deflection roll (1) is
approximately 5 cm, see chapter Terminal – Menus, "Menu 10, 'Manual operation'".
Pos: 48.99.37 / Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196 175311226_0. docx @ 4165 @ @ 1