6 Terminal machine functions
6.2 Keys
26
RP701-10 , RP701-11 , RP701-20 , RP701-21 , RP701-30 , RP701-31 , RP701-40 , RP701-41 , RP701-51
Comfort 1.0_en
Icon Explanation
For the “Hydraulic blade group control system” version
Blade group A swivelled in.
Blade group A and B swivelled in.
Blade group B swivelled in.
Blade group A and B swivelled out.
Blade group A and B swivelled out and blade cassette is down for blade removal
(deactivated).
For the “Working lights” version
Switched on.
Switched off.
6.2 Keys
The available icons comply with the equipment of the machine. The following represented icons
are not always available.
Icon Designation Explanation
Feed net in manual mode. Press the key to guide the net to the round
bale.
Feed film in manual mode. Press the key to guide the film to the round
bale.
Feed twine in manual
mode.
Press the key to guide the twine to the
round bale.
Net wrapping in manual
mode.
The previously selected mode (manual
mode or automatic mode) is displayed in
the set tying type. Press the key to change
the mode.
Net wrapping in automatic
mode.
Twine tying in manual
mode.
The previously selected mode (manual
mode or automatic mode) is displayed in
the set tying type. Press the key to change
the mode.
Twine tying in automatic
mode.
Chamber film wrapping in
manual mode.
The previously selected mode (manual
mode or automatic mode) is displayed in
the set tying type. Press the key to change
the mode.
To Next Page
Loading...
