Group 7 Data/Programming Page 136
Release R1.03e LEIBINGER JET3
Click in the grid of the input field on an empty point close to the line which
should be deleted. The start point (3) of the catch
frame is displayed red. At
the same time in the display <Coordinates>
(4) the coordinates of the object
frame start point are shown and in the display <Activity to carry out> (5)
the next required or possible activity.
Now click in the grid on an empty point on the other side of the line which
should be deleted to define an end point (6) for the catch frame. The catch
frame is now created.
Now press the button <Edit> (7) and afterwards the edit tool <Delete> (8).
The line will be deleted.
Press again the button <Function>
(9) and afterwards the drawing tool
<Selection > (10) to work on the rectangle.
Click on the grid field (11) where the interruption of the rectangle should
happen. The start point of the catch frame is displayed red.
Now click on the grid field (12) where the interruption should be finished. The
catch frame is generated.
Press the button <Edit> (13) and afterwards the edit tool <Delete> (14).
The marked area will be deleted.
To Next Page
Loading...
